SF-1A small

SF-1A

General purpose flux cored wire for shipbuilding and structures with impact test req. at -20°C.

AWS A5.20 E71T-1M H4
AWS A5.36 E71T1-M21A2-CS1
EN ISO 17632-A: T 42 2 ZMn P M21 1 H5
EN ISO 9606-1: FM1

General description:

SF-1A is a seamless rutile flux cored wire for welding with Argon/CO2 mixed shielding gas. Being seamless it provides welds with very low diffusible hydrogen content, typical 2.8ml/100g weld metal. The flux cored wire has excellent weldability in all positions and is extremely efficient in the root pass against ceramic backing. Good penetration in vertical down greatly reduces the risk of imperfections. It also gives excellent performance against porosity on primed steel plates when using automated welding such as a fillet welding tractor. SF-1A has a stable welding arc with less spatter and perfect bead surface. The flux cored wire has a clean, copper coated surface. Together with exact diameter and roundness it provides a stable and even wire feeding. This reduces wear and tear of liners and contact tips. The wire is classified as a grade 3 (-20°C).

Typical chemical composition of all-weld-metal:

CSiMnPSCu
0,050,411,360,0100,0080,26

Typical mechanical properties of all-weld-metal:

YieldTensileElongationCharpy
530 Mpa590 Mpa28 %95V(J)/-20°C

Diffusible hydrogen content:

<5 ml/100g (2,8 ml/100g typical).

Packaging information:

1,0mm x 5,0kg spool D200 -ArticleNo.:500110
1,2mm x 5,0kg spool D200 -ArticleNo.:500223
1,2mm x 12,5kg spool D300 -ArticleNo.:500124
1,2mm x 250kg drum Ø51cm -ArticleNo.:500320
1,4mm x 12,5kg spool D300 -ArticleNo.:500141
1,4mm x 250 kg drum Ø51cm -ArticleNo.:500330
1,6mm x 12,5kg spool D300 -ArticleNo.:500160
1,6mm x 250kg drum Ø51cm -ArticleNo.:500360

Approvals:

DNV-GL, LR, ABS, CWB, BV, PRS, RINA, CE

Reference/date:

SF-1A, English, 05.07.2023.