LASTEK 2400 small

Lastek 2400

Abrasion and impact

EN 14700 (E Fe16)
DIN 8555 (E 10 UM 65Z)

General description:

Hard facing electrode with first layer hardness up to 68 Rc on mild steel, depending on the parent metal. The wear facing shows little or no transverse cracking. Good shock-resistance. Smooth arc. Easy to strike. High hardness at elevated temperatures (up to 600 °C(1100 °F)) – (38-40Rc)

Typical applications:

Recommended for severe wear accompanied by moderate to high impact. Bone crushers, dredging teeth, feed screws in cement factories (fueller pumps) cement mixers, pulping knives etc.
Hardness: 60-68 Rc
Efficiency: 195 %

Typical chemical composition of all-weld-metal:

CCrVMnSiP & SFe
<5,020,0-25,09,0-12,00,5-2,0<2,0<0,03Balance

Tips:

Remove fatigued or cracked metal with Lastek 1900 or Lastek 1000. For surfacing more than two layers use Lastek 27 as a base layer and Lastek 2400 to finish. The electrode must be kept vertical to the work piece in order to obtain the maximum hardness. Keep amperage as low as possible to avoid dilution with the base metal.

Packaging information:

2,5mm x 350mm, 5,0kg -ArticleNo.:2400.25
3,2mm x 350mm, 5,0kg -ArticleNo.:2400.32

Other dimensions and packaging on request.

Referanse/dato:

Lastek 2400
English 20.11.2019.