BA-S3NiMo1/4
Solid SAW wire
EN ISO 14171-A – S3Ni1Mo0,2
SFA-5.23 / AWS A5.23 – ENi5
General description:
NiMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile pipe steels and high tensile fine grain steels in vessel and apparatus construction as well as Off-Shore applications. Especially suitable for low temperature applications because of low Mo-content. Best suitable if requirements for sour-gas environment are to match Ni < 1.0 %
Typical chemical composition:
See product datasheet.
Base materials:
• Pipe steels acc. to ISO 3183, EN 10208 and API-5: L450Q/X65 to L555Q/X80
Suitable fluxes: BF 6.30 and BF 6.5
• Fine grain steels acc. to EN 10025, EN 10028: P420ML/S420NL to S550QLQuenched and tempered steels such as N-A-XTRA 70, 20MnMoNi5
Suitable fluxes: BF 5.1, BF 6.5 and BF 10
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Packaging information:
4,0mm x 25,0kg spool -ArticleNo.:11418040
Other dimensions and packaging on request.